Google Website Translator Gadget

Translate




XRC HOBBY CENTRE
A-33-1B ,
JALAN PRIMA SAUJANA 2/A
SYEKSYEN 2,
TAMAN PRIMA SAUJANA,
43000 KAJANG.SELANGOR



OPERATE HOURS :

Tue-Sun 11am -9am
SAT 11am - 10am
FRI 2.30pm - 9pm
Mon - closed


CONTACT :
wan xrc : 018 - 3510027 call/whatapp
Xrc Shop : 603 - 87405756 (11am - 9pm)

WECHAT : xrchobby
FACEBOOK : xrc hobby
FACEBOOK : xrc hobby,prima saujana (page)
FACEBOOK : xrc hobby and indoor track (page)

Email - xrc3614@gmail.com
Email - xrc36@yahoo.com






PENGUMUMAN

HARAP MAKLUM..


BLOG INI SUDAH TIDAK DIGUNAKAN BERMULA JANUARI 2015 ATAS SEBAB GANGUAN DARI PIHAK KE-3 YANG SELALU MENGGODAM BLOG INI...SEGALA PERINCIAN,HARGA DAN STOCK YANG TERTERA DIDALAM PAGE INI TIDAK BOLEH LAGI DIGUNA PAKAI.


SILA KE WEBSITE BARU KAMI UNTUK MELIHAT PRODUK,STOK DAN HARGA BARANGAN TERKINI KAMI DI :


http://xrchobby.wix.com/malaysia


JUGA BOLEH TERUS HUBUNGI KAMI DI TALIAN:


018-2085040

018-3510027


WECHAT : xrchobby


PREMIS KAMI MASIH DILOKASI LAMA :


a-33-ab 1st floor,

jalan prima saujana 2/a,

prima saujana,

43000 kajang ,

selangor


web widgets
HARAP MAKLUM ,TERDAPAT KENAIKAN HARGA BARANGAN SELEPAS PENGUATKUASAAN GST, BERKEMUGKINAN SESETENGAH HARGA MASIH BELUM DITUKAR KE HARGA BAHARU!
SILA HUBUNGI KAMI UNTUK HARGA TERKINI DEMI MENGELAKAN KEKELIRUAN.

..SEKIAN
(XRC HOBBY)
Showing posts with label SAKURA. Show all posts
Showing posts with label SAKURA. Show all posts

CARBON LOWER DECK FOR SAKURA ZERO





specifications:




CARBON MAIN CHASSIS 2.25mm (NARROW)
FOR SAKURA ZERO Main Chassis 2.25MM (Narrow) For 3racing Sakura Zero 



stock  /  price:


OUT OF STOCK  /  RM195.00






(PIC ONLY SAMPLE FOR LOWER DECK NOT A CHASSIS KIT)

SAKURA D3 CHASSIS KIT FRONT MOUNT

3 Racing SAKURA Front Motor Drift Car D3 CS Drift




3 Racing Front Motor Drift Car (Sakura D3 CS Drift)

Development of a drift car since its launch until now SAKURA-ZERO, has been working concurrently with touring car. The tests are repeated, reaching the optimal weight balance to the drift of 3 Front motor belt. Finally "SAKURA D3 CS Drift" and was born.


Features:


By adopting the method of three belts, motors achieve a position with optimal drift. Stable long drift in excellent weight balance is possible.

It is pleasant counter drift is possible by increasing the maximum steering angle by the steering system of the new design, the caster angle is set to 8 degrees.


Drive-train:


Equipped with a belt tensioner to the rear, corresponding to the change of the number of teeth of the pulley. By the setting of the drive ratio of the front and rear driving to fit the driver's sense possible.



Ratio:



Front drive ratio of 38/13 (2.7), rear 30/22 (1.36) in the standard kit.
Spur is 40T pinion gear 64P-118T · Max.

Suspension
Camber angle can be up to a maximum of 10 degrees by the suspension of the new design. Foil can be used deep offset width becomes wider setting.

Oil damper
Full-fledged oil damper (part cylinder is made of resin) as standard equipment, setting a fine corresponding to the suspension. To ensure sufficient stroke By using the damper springs 54mm, with stable driving possible.

Wide-angle drive shaft
To minimize the vibration of the steering operation, the new universal shaft designed specifically for drift, made possible a stable drift.

Rear diffuser
Standard large rear diffuser to increase the driving stability.



c.s :


2.14 (build)
THIS IS KIT ONLY AND SETUP IS NEEDED*



80T 48P Spur Gear
The kit comes standard with a 48-pitch spur gear 80T. Various settings possible through the use of the spur gear (sold separately).

Riatoin
Adjustable Riatoin by replacing the rear suspension mount. Riatoin of standard kit 3 degrees.

Chassis
SAKURA D3 is standard equipment on the upper deck and main chassis made of a synthetic resin.
The main chassis is provided with cooling holes for heat dissipation measures everywhere.

Specifications are subject to change without notice*




Price / stocks:


RM320 (KIT ONLY WITHOUT ONEWAY)
OUT OF STOCK









SAKURA D3 READY KIT WITH C.S

PRICE WITH ONE WAY : RM 320.00



3 Racing’s answer to the hotly contested Drift Class is the all new Sakura D3 CS Drift featuring a true Front Motor and Triple Belt drive train, the true front motor design brings it closer to the weight distribution of real life drift cars giving it the same prolonged high speed drift action.
Combining ideas and feedbacks from seasoned Drift racers, the 3 Racing Drift Car was designed from the ground up instead of rebadging an existing chassis and selling it as a new product.
Features:
Weight Distribution
True Front Motor design – using a triple belt drive system this allows the motor to be positioned in front of the front differential and in the centerline of the chassis giving it the forward weight bias needed in contemporary high powered RC drift cars. The belt drive system gives it the advantages of smooth and stable power delivery when compared to shaft drive cars which tends to be affected by motor torque action under acceleration.
Steering
The front arms of the Sakura D3 has been completely redesigned and is unlike anything else currently available. The steering lock angle will be by far the largest available allowing for maximum counter steer actions and higher corner entry speeds. The caster angle on the C Hubs will feature a massive 10 degrees adding more aggressive steering on high speed entries and more closely resembling real life FR drift cars.
Drivetrain
Utilizing a belt drive system, overdriving the front or rear wheels can easily be done by changing the size of the belt pulleys , the 3 Racing Drift Car will come standard with a front wheel drive ratio of 38/13 (2.92) and overdrived rear wheel drive ratio of 30/22 (1.36). The triple belt system allows for flexibility of the positioning of the spur gear shaft allowing it to accommodate a wide variety of spur gear sizes up to a 64P 118T when used with a 40T pinion gears.
Front and rear solid axles will come standard for the easiest of drift action control with the option of ball and one way differentials available as optional parts.
Suspension
Suspension components have been completely redesigned to accommodate the largest chamber angle possible with the front and rear both allowing up to 10 degrees chamber whenever you need more side grip and also ensuring those large offset blind wheels stay within the side panels.
Oil Filled Coil Spring Shocks
Lengthen 54mm coiled spring oil filled shocks with threaded shock bodies allows a more progressive chassis roll action and easy tuning."
Wide Angle Driveshafts
The universal driveshafts of the Sakura D3 has been given a redesign to minimize chattering vibrations of the front inside wheel when using a front solid axleand steering is near maximum lock, which is crucial to maintain the front inside wheel will stay on the ground and provide a more consistent drift action.

Molded Rear Diffuser
For an added touch of realism, a molded composite rear diffuser comes standard to give the Sakura D3 the extra attention to detail.



80T 48P Spur
A 80 tooth 48 pitch spur gear will come standard with the Sakura D3 kit.




-3 Degrees Rear Toe-In
Rear toe-in is adjustable via the change of suspension mounts, the Sakura D3 kit will come standard with -3 degrees rear toe-in mount.




Composite Molded Chassis
The Sakura D3 will be outfitted with a FRP upper chassis and a molded composite main chassis featuring a motor cooling air inlet and designed with the rigidity to ensure efficient side to side weight transfer to easily initiate high speed drifting.














BERKEMUNGKINAN ADA HARGA BARANGAN DAN STOK DIDALAM BLOG INI YANG MASIH BELUM DI KEMAS KINI,HARGA YANG TERTERA AGAK MAHAL ..UNTUK KEPASTIAN ATAU MEMBUAT PESANAN SILA HUBUNGI XRC,PERTANYAAN HARGA YANG LEBIH TEPAT BESERTA KOS PENGHANTARAN KE PINTU RUMAH ANDA....

-harap maaf atas kesulitan dan kesilapan kami
by -xrc hobby

XRC HOBBY WEBSITE